Search Engine
Search Results
Your search for Spice found the following documents (of 22539 documents searched):
Displaying documents 151-160 of 180, with best matches first:
- 151. Pi Speaker Forum - Re: new xo question - light dawns! - Wayne Parham, May 15, 2003 at 17:55:47
-
Re: new xo question - light dawns! If you put an additional 8 ohms resistance in series with the tweeter, you would increase...
URL: http://audioroundtable.com/PiSpeakers/messages/11098.html
- 152. PiSpeakers Forum - Re: TAD TD-4001 Passive Crossover Suggestions Wanted! - Wayne Parham, January...
-
I built a crossover specifically for a speaker that used a TAD 1602 and 4001. You can find it in the π two-way crossover...
URL: http://audioroundtable.com/PiSpeakers/messages/18755.html
- 153. PiSpeakers Forum - Re: Now with measurements. - Wayne Parham, February 27, 2008 at 13:48:37
-
Good stuff, Ken. The peaking you're seeing is what we want, but there is a little bit too much of it. If you load a...
URL: http://audioroundtable.com/PiSpeakers/messages/22162.html
- 154. Pi Speaker Forum - Four PI Thermionic & 1K6a012dB - John B., December 02, 2001 at 15:51:23
-
Four PI Thermionic & 1K6a012dB I have the four pi thermionic plans, and I've already started assembling the boxes - parts...
URL: http://audioroundtable.com/PiSpeakers/messages/2066.html
- 155. PiSpeakers Forum - Re: SPICE parameters - Wayne Parham, February 02, 2006 at 09:52:37
-
You can use an L-Pad in the crossover circuit. It's basically a high-power potentiometer. As for measurement of a driver for...
URL: http://audioroundtable.com/PiSpeakers/messages/18946.html
- 156. Pi Speaker Forum - 16 ohm tweeter crossover values - Wayne Parham, November 11, 2003 at 12:40:32
-
16 ohm tweeter crossover values We've discussed this issue several times before, and I thought maybe there was a specific set...
URL: http://audioroundtable.com/PiSpeakers/messages/12988.html
- 157. PiSpeakers Forum - Crossovers and complex reactive/resistive loads - Wayne Parham, November 04,...
-
Best bet is to plot response using Spice. That will let you represent the drivers much more accurately with voice coil...
URL: http://audioroundtable.com/PiSpeakers/messages/20485.html
- 158. Pi Speaker Forum - Re: Compression Drivers arrived !!! - Wayne Parham, May 24, 2003 at 06:29:28
-
Re: Compression Drivers arrived !!! You most likely won't be able to try it out effectively with your graphic EQ for two...
URL: http://audioroundtable.com/PiSpeakers/messages/11205.html
- 159. PiSpeakers Forum - Re: Wayne was right. - dB, June 08, 2006 at 12:45:56
-
Yes. Another thing that I discovered when working with it's parameters for other guys, was that, after that they considered...
URL: http://audioroundtable.com/PiSpeakers/messages/19826.html
- 160. PiSpeakers Forum - Re: Do R1 and R2 change with a 16 ohm driver? - Wayne Parham, March 09, 2005...
-
It isn't quite as simple as that in practice, but that's the idea. The thing is that R2 sets the load for the crossover, so as...
URL: http://audioroundtable.com/PiSpeakers/messages/16569.html
Documents 151-160 of 180 displayed.
Results Pages: << Previous | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | Next >>
Search Tips
-
Main Page