Posted by Wayne Parham on January 02, 2003 at 13:16:33

In Reply to: Re: 6DJ8 Tube Crossover posted by spkrman57 on January 02, 2003 at 04:11:50:

Check out Gary Kaufmann's PCB:

The traces correspond to Steve Bench's crossover, which is what the circuit is based on. Steve says that Gary's board has room for the extra components, and you can see from the photograph that there are what appears to be prototyping holes just under the tube location. I haven't confirmed this to be true, but since there are only four additional parts, I expect that it will work quite well. My circuit is the same as Steve's, except for the additional components R15, R16, R17 and C10, used for tweeter compensation. The Spice model makes it easy to tailor the crossover and configure it for response curves that suit our needs.

• Wayne.... - Garland 13:27:01 01/02/03 (5)
  • Four π implementation - Wayne Parham 14:00:40 01/02/03 (4)
    • Re: Four π implementation - Garland 18:12:26 01/02/03 (1)
      • Re: Four π implementation - Wayne Parham 17:30:33 01/08/03 (0)
    • Re: Four π implementation - Rusty Iron 16:09:28 01/02/03 (1)
      • Re: Four π implementation - Wayne Parham 17:34:57 01/08/03 (0)