Posted by MQracing [ 141.151.13.134 ] on December 03, 2005 at 14:56:12:

In Reply to: Re: The shunt capacitance of grid and anode chokes posted by Damir on December 03, 2005 at 14:34:55:

Hi Damir:

The Lundahl that you mention at the recommended 15 mils dc would have a voltage drop of 36.

On most of our plate chokes we try to stay at or below 20 volt drop. Worse case that I can think of is our unit with a published dc current rating of 50 mils which has a dcr of approx 550 ohms which equates to a 27.5 volt drop and a dc copper loss (in watts) of 1.375.

Like Lundahl and many other manufacturers we do not publish Cw.

cheers,

msl

Replies:

• Re: The shunt capacitance of grid and anode chokes - PakProtector 16:43:41 12/03/05 (4)
  • which is to say.. - PakProtector 17:03:15 12/03/05 (3)
    • Re: which is to say.. - Damir 10:57:40 12/04/05 (2)
      • Re: which is to say.. - MQracing 11:12:31 12/04/05 (1)
        • Re: which is to say.. - PakProtector 12:09:32 12/04/05 (0)