Posted by Thrint [ 205.188.116.67 ] on September 04, 2005 at 08:12:01:
Hey-Hey!!!,
There seem to be a few places to improve on. The question to me is: is the sonic performance dependant on the rather poor performance of the singletriode CCS-es? So-to-say, would a few strategically implemented pentodes, or faux-pentode( twin triode cascode ) help or hurt?
The first one which comes to mind is the plate load of the grounded cathode amplifier( lower section, fed from the volume pot ).
The next mod is, can we do away with the resistor between the two output sections? or, has anybody experimented with putting the output at both ends of the resistor?
Also, changing the performance of the first half's PSRR will require a different application of PS noise to the second half. Either with a different pair of resistors, or a pot.
By my own experience, larger output caps would probably help. It depends on the rest of the system. I like 7.5-10k grid resistors in my amps, so the linestage's ability to drive a SS-like load is required.
regards,
Douglas
[ GroupBuild Forum ] [ Help ]