Posted by Bill Epstein [ 65.189.211.41 ] on January 01, 2006 at 04:09:11:
In Reply to: Conical horn project posted by PakProtector on December 31, 2005 at 16:47:26:
Mount the router to a piece of plywood or MDF for a temp router table. Cut a jig with the 22.5 angle large enough to be stable as it moves along the table. Use double-face tape to hold the workpiece to the jig. Yup. It really works!
SAme can be done with the tablesaw up against the rip fence or build a cross-cut sled.
[ Craftsmen Forum ] [ Help ]