Posted by thylantyr [ 66.35.226.228 ] on January 28, 2008 at 12:43:45:
In Reply to: Re: so I built these lines with a single tweeter posted by Dave on January 27, 2008 at 11:41:52:
I tuned to 100hz, four NSB per chamber [~1.5 cu. ft.}, 6" hole in
the back as the port. The WinISD models shows a peak in upper
midbass, I wanted this on purpose as I didn't expect much from the
NSB's as I wanted higher SPL levels. It works well, the upper midbass
is very strong - in room - and if it's too much, I can use the DCX
EQ to tame it. I can also plug the rear port with a fancy piece of
wood to make it a sealed box. I did this, but I liked the more
aggressive sound with the port.
[ ArraySpeakers Forum ] [ Help ]